Digital Jockey / Jacking Pump Controller – AS 2941-2013 Compliant

Digital Jockey / Jacking Pump Controller – AS 2941-2013 Compliant

Model No.: 80-CONTROL-J-PUMP-3PH , 80-CONTROL-J-PUMP-1PH

Available in single phase (up to 3 KW) and 3 phase (up to 5.5 KW) options, this Jockey / Jacking pump controller has been specifically designed to meet all the requirements of AS 2941-2013 (The Australian Fire Pump Standard) including but not limited to clauses 5.1 to 5.3.
For more information regarding compliance to the Australian standard AS 2941-2013 please refer to the relevant section/s within the standard, or contact us

This Jockey / Jacking pump control panel is designed to maintain a uniform or relatively high pressure on fire protection system, is is also used to boost the installation pressure in automatic sprinkler systems.

Power Suply: 415/241 V
Indicators: Power On, Pump Running, Pump Overload, Pump Counter
Switches: Manual, Off, Auto, Main Switch
Volt Free Contacts: Pump Run N/O Contacts, Fault N/O Contacts

 

*Specifications are subject to change without notice

This Jockey / Jacking pump controller is supplied in a signal red metal IP54 enclosure, and includes the following features:

  • Mains isolator
  • Control circuit breaker
  • Earth + neutral bar
  • 3 position switch ( Man/Off/Auto)
  • Pump contactor with overload
  • Indicators for mains available
  • Pump run
  • Pump fail
  • Non-resetable pump start counter
  • Manual Off Auto Switch
  • Fault indicator
  • Mains isolate switch

Volt free contacts are also fitted for pump run and pump fail.

When ordering this controller an overload size must be chosen, and will be fitted at no charge. Overload options are as follows:

  • 1.6-2.5 Amps
  • 2.5-4.0 Amps
  • 5.5 – 8.0 Amps
  • 9.0 – 13.0 Amps
  • 12.0 – 18.0 Amps
  • 17.0 – 25.0 Amps ( this overload will be provided as standard if no overload is ordered)