Lister Petter 6.3kVA, Single phase generator in Canopy


Lister Petter 6.3kVA, Single phase generator in Canopy

$9,000.00 $7,990.00

Model No.: LWA10A-WLE150

Lister powered 6.3kVA single phase diesel generator in canopy. With Lister Petter’s legendary performance and reliability this water cooled generator is perfect for both stationary and prime power applications.


Alternator Model: Lister LWA
Electric Power: Single Phase
Active Rating: 6.3 kVA at 0.8 pf (Standby)
Power: 5.1 kW
Electric Potential: 240V
Frequency: 50Hz


Engine Model: Lister Petter LPW2
Engine Speed: 1500 rpm
Cylinder No.: 2
Aspiration: Natural
Starter Voltage: 12V
Cooling System: Radiator Cooled
Fuel Type: Diesel
Fuel Tank Capacity: 44 L
Approx. Fuel Consumption (Continuous): 1.9 L/hr
Approx. Fuel Consumption (Standby): 1.5 L/hr


Dimensions (L x W x H): 1390 x 705 x 1070 mm (L x W x H)
Weight: 428 kg

*Specifications are subject to change without notice

All LWA generators have a vibration isolated control cubicle, which has the following features:

  • electronic digital control module with monitoring/control facility and warning indicators
  • automatic shutdown protection
  • emergency stop button (lock-down type) – open sets only
  • AC output circuit breaker with over-current protection
  • DC circuit control switch and overload circuit breaker

The control module gives digital readouts of:
generator voltage (phase-to-phase and phase-to-neutral)

  • generator current (each phase displayed separately)
  • generator output frequency
  • mains voltage (phase-to-phase and phase-to-neutral) AMF sets only
  • mains frequency (each phase displayed separately) AMF sets only
  • engine speed
  • engine coolant temperature
  • battery voltage
  • engine hours run

The control module has indicators for:

  • over speed / under speed
  • emergency stop
  • engine temperature
  • failure to start
  • battery charger failure

Automatic shutdown occurs under:

  • low engine oil pressure
  • high engine temperature
  • over speed / under speed
  • failure to start after three attempts
  • acoustic canopy
  • residential exhaust silencer
  • 2 off roof mounted lifting eye bolt fixings
  • external emergency stop button
  • tough ripple effect paint finish
  • earth straps on service doors
  • large side door for easy service access
  • document pocket in access door
  • control cubicle 
  • Manual/Remote Start Sets These sets have the flexibility of either manual or remote automatic operation:
    • manual operation is by START and STOP push-buttons on the control module
    • remote operation is achieved by connecting a 2-wire circuit to the
      relevant terminals on the control module and is activated by setting the control module to AUTO
  • Automatic Mains Failure Sets
    (AMF) AMF control system integral with control cubicle
    The AMF specification provides that in the event of a mains failure the generating set will automatically operate to supply the electrical load.
    In addition to the standard features automatic mains failure sets have the following features:

    • mains monitoring unit to control set operation
    • load-transfer contactors, mechanically and electrically interlocked (rated for set output)
    • indicator for mains-on- load or plant-on-load
    • control module timer circuits set to delay start, delay transfer back  to mains and delay stop to allow for engine cool down
    • solid state automatic battery charger that maintains charge when  set is not running
  • residential exhaust silencer for open sets (as fitted to acoustic)
  • acoustic canopy kit (including residential silencer kit) for retro-fitting to open sets
  • AMF system with remote mounted ATS panel
  • sand filter unit, high efficiency, labyrinth type complete with washable dust element
  • rodent mesh
  • integral dummy loads (various ratings)
  • industrial electrical output sockets
  • automatic solid-state 4-Amp battery charger (standard on AMF gensets)
  • 2-wheel trailer