44kVA, 3 Phase, Diesel Standby Generator with Crossley Engine
Model No.: ED44CY/3
Special Price $10,750
The Crossley powered ED44CY/3 is a 44kVA three phase generating set. Complete with Crossley SLG series single bearing, 4-pole, brushless alternator, remote start/stop control system and 130 litre fuel tank. Crossley powered generating sets are fully integrated power generation systems that are stringently tested to provide optimum performance, reliability, and versatility for both stationary and prime power applications. Weather protective acoustic canopy options available.
Alternator Model: Crossley SLG Series
Electric Power: Three Phase
Active Rating: 44 kVA at 0.8 pf (Standby)
Power: 35 kW
Electric Potential: 415V
Engine Model: Crossley 4040M-15
Engine Speed: 1500 rpm
Cylinder No.: 4
Cubic Capacity: 4.087 L
Bore / Stroke: 105 x 118 mm
Compression Ratio: 17 : 1
Starter Voltage: 12V
Flywheel ( Max. Continuous Power): 38 kW
Combustion Air Flow: 2.4 m³/min
Cooling Air Flow: 90 m³/min
Cooling System: Radiator Cooled
Heat Rejection to Cooling System: 29 kW
Exhaust Gas Flow: 6.7 m³/min
Exhaust Gas Temperature: 540°C
Fuel Type: Diesel
Fuel Tank Capacity: 130 L
Approx. Fuel Consumption (Continuous): 7.7 L/hr
Approx. Fuel Consumption (Standby): 8.3 L/hr
Dimensions (L x W x H): 2100 x 980 x 1400 mm (L x W x H)
Weight: 900 kg
*Specifications are subject to change without notice
The control starting system is fitted standard.
Starting is remote or local to the machine with push Start/Stop button and includes the following digital indicators:
- Oil Pressure
- Engine Temperature
- Volts and Amps
- Shut Down for low oil & temperature
- Emergency stop button
- Output circuit breaker
- Static Battery Charger
The control system can also be configured to operate with an Automatic Transfer Switch with logic.
- Heavy duty fabricated steel base frame
The complete generating set is mounted as a whole onto a heavy duty fabricated steel base frame. Anti-vibration pads are fixed between the engine and alternator feet, and the base frame, ensuring complete vibration isolation of the rotating assembly.
- Bunded Fuel Tank (AS 1940-2004 compliant)
The fuel tank is fully bunded and complies fully with relevant sections in AS 1940-2004. It has a secondary containment compound with a capacity as big or bigger than that of the tank, and is made of surface coated steel. This compound is designed to sufficiently retain spillage and enable recovery of any spillage. For more information regarding AS 1940-2004 compliance refer to the standard, or contact us.
- Battery Charger
This trickle charge battery charger ensures that your generator can start up when needed. It has both 12v and 24v charging capabilities.
- Control Panel with Emergency Stop button
This control panel monitors the controls of a single unit to achieve automatic start/stop, data measuring/monitoring, alarm protection and three remote systems (remote control, remote measuring and remote communication). The controller adopts large liquid crystal display (LCD) and has a 32 bit micro-processor with precision parameters for measuring, fixed value adjustment, time setting and threshold adjustment.
- Prime or Standby Power
Standby: kVA @ 0.8 pf These ratings are applicable for supplying continuous electrical power (at variable loads) in the event of a utility power failure. No overload is permitted on these ratings. Minimum output from alternators are peak continuous rated (as defined in 1SO 8528-3 @ 27°C. Annual hour limitation: 500 hours).
Prime (continuous): kVA @ 0.8 pf. (Divide standby rating by 1.1). Available for continuous electrical output. There is no hour limitation. 10% overload is available 1 hour in 12. The generating set and this specification is designed for environmental conditions of up to 27°C, up to 152.4 m above sea level and up to 60% relative humidity. Ratings at 0.8 pf.
For ratings outside this range, please contact us.
- Additional Protection Alarms
- Jacket Heater
- Automatic Transfer Switch (ATS)
- Control System (remote Start/Stop) with Mains Failure option
- Weather protected acoustic canopy
- Trailer mounted
- Load Banks
- Auxiliary Fuel Tanks
- Genuine Spare Parts
Canopy Option (CB Canopy)
A weather protective acoustic enclosure may be fitted as optional, to protect and prolong the life of your generator. Constructed of galvanised steel sheet that is cleared and finished using a powder coat paint finish, this acoustic canopy will reduce the noise level of the generating set to approximately 80 dB(A) at 1 metre from the machine (73 dB(A) @ 7 m).
Requires 800 mm access (width) to open doors, and the exhaust
protrudes 300 mm above the canopy. Canopy Weight: 700 kg.
Dimensions: 2860 mm (L) x 1000 mm (W) x 1760 mm (H)
6.1kVA, Single Phase, Diesel Standby Generator with Lister Petter EngineRead more
85kVA, 3 Phase, Diesel Generator with John Deere EngineRead more
27.5kVA, 3 Phase, Standby Generating Set with Crossley Diesel EngineRead more
9.5kVA, Single Phase, Diesel Standby Generator with Lister Petter EngineRead more