10kVA, Single Phase, Standby Diesel Generator with Lister Petter Engine in CanopyK-MAX 10
Model No.: K-MAX 10
The Lister Petter powered K-MAX 10 is a single phase standby 10kVA diesel generator. Complete with Crossley SLG series single bearing, 2-pole, brushless alternator, remote/2-wire start control system, 45 litre fuel tank, weather protective acoustic canopy and Lister Petter engine. Welling and Crossley Lister Petter powered generating sets are fully integrated power generation systems that are stringently tested to provide optimum performance, reliability, and versatility for standby applications.
Alternator Model: Lister Petter
Electric Power: Single Phase
Active Rating: 10 kVA at 0.8 pf (Standby)
Power: 8.0 kW
Engine Model: LISTER PETTER KV2-80
Engine Speed: 3000 rpm
Starter Voltage: 12V
Cooling System: Radiator Cooled
Fuel Type: Diesel
Fuel Tank Capacity: 45 L
Approx. Fuel Consumption (40% load): 1.4 L/hr
Approx. Fuel Consumption (80% load): 2.8 L/hr
Dimensions (L x W x H): 1275 x 740 x 790 mm (L x W x H)
Weight: 280 kg
*Specifications are subject to change without notice
Standard control panel features:
- Both manual and remote start
- Generator overload protection
- Built in alarms and warnings
- Generator/load power monitoring
- Accumulated power monitoring
- True RMS measurements
- Tamper proof engine hours display
- Field adjustable parameters
- Remote start operation available
- Weather protective Acoustic Canopy
A weather protective acoustic enclosure is included, to protect and prolong the life of your generator. Finished using a robust ripple effect scratch resistant powder coat paint finish, this acoustic canopy will reduce the noise level of the generating set to approximately 80 dB(A) at 1 metre from the machine (70 dB(A) @ 7 m).
- Heavy duty fabricated steel base frame
The complete generating set is mounted as a whole onto a heavy duty fabricated steel base frame. Anti-vibration pads are fixed between the engine and alternator feet, and the base frame, ensuring complete vibration isolation of the rotating assembly.
- Bunded Fuel Tank (AS 1940-2004 compliant)
The fuel tank is fully bunded and complies fully with relevant sections in AS 1940-2004. It has a secondary containment compound with a capacity as big or bigger than that of the tank, and is made of surface coated steel. This compound is designed to sufficiently retain spillage and enable recovery of any spillage. For more information regarding AS 1940-2004 compliance refer to the standard, or contact us.
- Battery Charger
This trickle charge battery charger ensures that your generator can start up when needed. It has 12v charging capabilities with leads supplied.
- Control Panel with Emergency Stop button
This control panel monitors the controls of a single unit to achieve manual and remote start, data measuring/monitoring, alarm protection and three remote systems (remote control, remote measuring and remote communication). The controller adopts large liquid crystal display (LCD) and has a 32 bit micro-processor with precision parameters for measuring, fixed value adjustment, time setting and threshold adjustment.
- Prime or Standby Power
Standby: kVA @ 0.8 pf These ratings are applicable for supplying continuous electrical power (at variable loads) in the event of a utility power failure. No overload is permitted on these ratings. Minimum output from alternators are peak continuous rated (as defined in 1SO 8528-3 @ 27°C. Annual hour limitation: 200 hours).
Prime (continuous): kVA @ 0.8 pf. (Divide standby rating by 1.1). Continuous use should not exceed 3 hours and annual operation should not exceed 300 hours within the sanctioned parameters. The average load should not be lower than 40% or higher than 80% of this rating. The generating set and this specification is designed for environmental conditions of up to 45°C, up to 100 m above sea level and up to 60% relative humidity. Ratings at 0.8 pf.
For ratings outside this range, please contact us.